COPPER RODS.PIPES.SHEET RECTANGULAR.SECTION IN ALL SIZES & SHAPS Y
GRADE : CATH, ETP, FRHC,FRTP-1, 2, ATP, DHP-1,DHP-2, DPA & OFHC Copper, Beryllium Copper In All Sizes : Rods Range Dia 3mm to 200mm /Pipes Tubing Range OD 3mm to 150mm WT Upto any thickness subject to outside diameter /Sheet Range 4’ x 8’ ,4’x4’, 4’x14”Thickness :.1mm to 100 mm / Bus Bars Flat Strips: 5mm to 200mm in any thickness, Straight Length Coil Form, Tinned & Bare Copper Flate,Wire.Strips, Fuse Wire /Conductors/Braided Flexible ,Grounding Rods & Accessories, Standard Conductor,Lugs,Wire Mesh, /section/ Fittings/Plumbing; Copper Profiles/Earthing Plate & Earthing Materials, Lighting Arresters /Anodes Etc,:
| HIGH CONDUCTIVITY COPPER |
:IS;613/BS;1036,IS;9713/IS-1897-1983 |
| ARSENICAL COPPER |
:IS;288/BS;24PARTV/IS2501/IS191 GR DPA |
| CADMIUM COPPER |
:BS:23 |
| TELLURIUM COPPER |
:C:109 BS:2874 |
| COPPER TUBES |
: ASTM B-68, ASTM:B-75, ASTM:B-280, |
| IS:191:1980:DHP,DLP |
& ETP GRADE COPPER: UNS NO FOR DHP GRADE |
IS C12200
|
BS;2871 PART 3 ----DO------ C-106
DIN 1785 -----DO------ StCuF 25
IS 2501 ----- DO---- ETP |
| |
|
COPPER
Phosphorous De-Oxidized Arsenical Copper Tubes:- Heat Exchanger Tubes, Condenser Tubes,
Refrigeration Tubes Range OD1/8” to 32 mm Length 15 to 30 Mtr in coil , Capillary, Fitting & P.V.C Coated, Copper Fin Tubes: Range ¾”,5/8” Fin: 19Fin,26Fin, 26 intregues:40Fin,Turbo B ,F,Tube, Ermeto fitting, Tees, Elbows, Coupling U’Bend,Reducing coupling,Etc,
CUPRO NICKLE TUBES; 90/10 : BS 2871 PART 3 CN 102,ASTM B-111 C 70600, DIN 1785
CuNi10 Fe 1 Mn,
NFA 51 102 CuNi10 Fe 1 Mn’JIS H 3300 C 7060,IS 1545
CuNi10 Fe 1,
CUPRO NICKLE TUBES; 70/30: BS 2871 PART 3CN-107, ASTM B-111C 71500, DIN 1785
CuNi 30 Mn 1 Fe
NFA 51 102 CuNi 30 Mn 1 Fe, JIS H 3300C 7150, IS 1545
CuNi 30 Mn 1 Fe
IPS STANDARD COPPER PIPES ELECTRICAL BUS BARS SOLID DRAWNCOPPER PIPES CONFIRMING ASTM-B-42 STD BS:2871-1957 HIGH CONDUCTIVITY TOUGH PITCH,COPPER:% MAXIMUM- 99.9%
Standard Dimensions, Weight and Tolerances.: Note-All tolerance plus and minus except as otherwise indicated
| nominal or |
outside
Theoretical weight |
average outside |
Wall thk |
Tolerance |
| Standard pipe |
diameter
ib/ft(Kg/m)
|
diameter |
in (mm) |
in(mm) |
| Size inch |
in (mm) |
tolerance in(mm)
All minus
|
|
|
Regular
| 1/8” |
0.405(10.3)
0.259(0.385)
|
0.004(0.10)
|
0.062(1.57) |
0.004(0.10) |
| 1/4” |
0.540(13.7)
0.457(0.680)
|
0.004(0.10)
|
0.082(2.08) |
0.005(0.13) |
| 3/8” |
0.675(17.1)
0.641(0.954) |
0.005(0.13)
|
0.090(2.29) |
0.005(0.13) |
| 1/2” |
0.840(21.3)
0.955(1.42)
|
0.005(0.13) |
0.107(2.72) |
0.006(0.15) |
| 3/4” |
1.050(26.7)
1.30(1.93)
|
0.006(0.15) |
0.114(2.90) |
0.006(0.15) |
| 1” |
1.315(33.4)
1.82(2.71)
|
0.006(0.15) |
0.126(3.20) |
0.007(0.18) |
| 1-1/4” |
1.660(42.2)
2.69(4.00)
|
0.006(0.15) |
0.146(3.71) |
0.008(0.20) |
| 1-1/2” |
1.900(48.3)
3.20(4.76)
|
0.006(0.15) |
0.150(3.81) |
0.008(0.20) |
| 2” |
2.375(60.3)
4.22(6.28)
|
0.008(0.20) |
0.156(3.96) |
0.009(0.23) |
| 2-1/2” |
2.875(73.0)
6.12(9.11)
|
0.008(0.20) |
0.187(4.75) |
0.010(0.25) |
| 3” |
3.500(88.9)
8.76(13.0)
|
0.010(0.25) |
0.219(5.56) |
0.012(0.30) |
| 3-1/2” |
4.000(102)
11.4(17.0)
|
0.010(0.25) |
0.250(6.35) |
0.013(0.33) |
| 4” |
4.500(114)
12.9(19.2)
|
0.012(0.30) |
0.250(6.35) |
0.014(0.36) |
| 5” |
5.562(141)
16.2(24.1)
|
0.014(0.36) |
0.250(6.35) |
0.014(0.36) |
| 6” |
6.625(168)
19.4(28.9)
|
0.016(0.41) |
0.250(6.35) |
0.014(0.36) |
| 8” |
8.625(219)
31.6(47.0)
|
0.020(0.51) |
0.312(7.92) |
0.022(0.56) |
| 10” |
10.750(273)
46.2(68.7)
|
0.022(0.56) |
0.365(9.27) |
0.030(0.76) |
| 12” |
12.750(324)
56.5(84.1)
|
0.024(0.61) |
0.375(9.52) |
0.030(0.76) |
Extra Strong (Heavy)
| 1/8” |
0.405(10.3)
0.371(0.552)
|
0.004(0.10) |
0.100(2.54) |
0.006(0.15) |
| ¼” |
0.540(13.7)
0.625(0.930)
|
0.004(0.10) |
0.123(3.12) |
0.007(0.18) |
| 3/8” |
0.675(17.1)
0.847(1.26)
|
0.005(0.13) |
0.127(3.23) |
0.007(0.18) |
| ½” |
0.840(21.3)
1.25(1.86)
|
0.005(0.13) |
0.149(3.78) |
0.008(0.20) |
| ¾” |
1.050(26.7)
1.71(2.54)
|
0.006(0.15) |
0.157(3.99) |
0.009(0.23) |
| 1” |
1.315(33.4)
2.51(3.73)
|
0.006(0.15) |
0.182(4.62) |
0.010(0.25) |
| 1-1/4” |
1.660(42.2)
3.46(5.15)
|
0.006(0.15) |
0.194(4.93) |
0.010(0.25) |
| 1-1/2” |
1.900(48.3)
4.19(6.23)
|
0.008(0.15) |
0.203(5.16) |
0.011(0.28) |
| 2” |
2.375(60.3)
5.80(8.63)
|
0.008(0.20) |
0.221(5.61) |
0.012(0.30) |
| 2-1/2” |
2.875(73.0)
8.85(13.2)
|
0.008(0.20) |
0.280(7.11) |
0.015(0.38) |
| 3” |
3.500(88.9)
11.8(17.6)
|
0.010(0.25) |
0.304(7.72) |
0.016(0.41) |
| 3-1/2” |
4.000(102)
14.4(21.4)
|
0.010(0.25) |
0.321(8.15) |
0.017(0.43) |
| 4” |
4.500(114)
17.3(25.7)
|
0.012(0.30) |
0.341(8.66) |
0.018(0.46) |
| 5” |
5.562(141)
23.7(35.3)
|
0.014(0.36) |
0.375(9.52) |
0.019(0.48) |
| 6” |
6.625(168)
32.9(49.0)
|
0.016(0.41) |
0.437(11.1) |
0.027(0.69) |
| 8” |
8.625(219)
49.5(73.7)
|
0.020(0.51) |
0.500(12.7) |
0.035(0.89) |
| 10” |
10.750(273)
62.4(92.7)
|
0.022(0.56) |
0.500(12.7) |
0.040(1.0) |
A. The Average outside Diameter of a Tube Is the Average of the Maximum and Minimum outside Diameters As Determined At Any More Cross Section
Of The Pipe,
B. Maximum Deviation at any one point
YBrass Rods. Pipes. Rectangular.Section In All Sizes & ShapesY
YBritish Standard Specification For Principal Non-Ferrous Casting AlloysY
GUN METAL,PHOSPHER,BRONZE MATERIALS SPECIFICATION AND APPLICATION
LEAD,ANTIMONIAL LEAD/ZINC/TIN/NICKLE. BISMUTH.PLUMBING METAL/SOLDER STICKS/WHITE METALS/ANODS ETC AS PER CLIENTS SPECIFIC REQUIREMENTS
|
